So over the past two months I finally got out of ecoresearch stagnation and into ecorefurb reality. It’s not like we’ve knocked down the house and completely resurrected it as an ecohouse; we’ve just done what every Victorian single-brick house needs: insulated our outside walls, inside.
After all my research about wall and floor insulation, I decided on the product for the walls (Knauf Insulation Earthwool Ecobatts) and decided against insulating under the floor as the amount of uncarpeted floor space (about 4 square metres plus the hall) meant the cost of the labour and disruption to the household just wasn’t worth it.
After meeting six builders I finally decided on the one for us, a local builder called Rob. He understood my eco-motivation and had even insulated some of his own house with sheep’s wool and was willing to learn new techniques. An enlightened builder indeed.
Craig O’Donnell, the man in charge of residential refurbishment at Knauf Insulation, came and trained Rob and his building partner Andy on the day the materials were delivered, and I was mighty glad I hadn’t thought I would be capable of doing it myself. Although it is something a ‘competent DIY person’ should be able to do, I asked Andy and he said you’d have to be very competent with a lot of good tools. So that’s us out.
Preparation and plastering
We’d decided to insulate the external walls of three rooms: the lounge and bedroom bay window walls and two walls of the back bedroom. So we had to pack up large parts of the rooms in order that Rob could have room to work and all our stuff didn’t get covered in dust. Luckily we have a garage so could store some things in there, but inevitably you have to keep your clothes and everyday stuff accessible, and not everything can be moved (piano, sofa, beds, cabinets, etc).
Insulating the walls inside a Victorian house is a dusty process. Before putting the insulation material in, the skirting boards, coving, curtain rails, light switches, plug sockets, window ledges and architraves all have to be removed. In our case, the builder found the skirting was rotten (because of our condensation problem, I presume). The plaster on some of the walls was also falling off due to the condensation, so that needed to come off before the work was started, as the walls need to be plumb.
Preparation done, the bare walls then have the Ecostud battens attached with long screws through the wall. These battens are a type of chipboard (Oriented Strand board) bonded to extruded polystyrene that sit against the wall and stop the cold seeping through. They are supplied at the appropriate thickness for the EcoBatt. If the battens were just wood without the insulation attached they’d be colder than the wall insulation and act as a ‘cold bridge’, conducting cold air into the room.
Then the Earthwool EcoBatts, which look like strips of cuddly loft roll but are higher performance (60mm thick x 555mm wide x 1200mm long), are placed between the battens (this is the easy bit – my 15-year-old son and his cousin helped with this). We chose 75mm thickness insulation, which has a thermal conductivity of 0.033W/mK, which is a measurement of heat-loss through the material.
The best you can get with glass mineral fibre is 0.032W/mK, but the people at Knauf went with 0.033 material as it brings the cost down. At 75mm, the system meets current building regulations for refurbishments. With the plasterboard over the top, this means you lose 90mm of space, but as we took most of the plaster off, it was actually more like 70mm.
The brown Earthwool EcoBatts are rather teddybear-like in feel. But reassuringly, they’re also non-combustible and water repellent. And as they’re made from recycled glass bottles with no petrochemicals or ozone-depleting chemicals, they’re as green as Knauf Insulation can make them. The fact that they are so lightweight and flexible makes them very easy to handle, ensuring that you can push them together easily and cut small strips off with a Stanley knife for any gaps so no cold air can seep through anywhere.
When every bit of wall is insulated (including pushing it down a few inches below the wall’s floor level), a foil backed plasterboard is screwed onto the battens (the foil prevents any moisture coming through to the walls and condensation building up). The plasterboard is then skim-plastered as normal and all the skirtings, covings, window ledges, and so on, put back on.
In order to stop ‘cold bridging’ where the insulation material stops – that is at the corner edges of the room – the insulation has to go about 18 inches round the corner of the side walls from top to bottom. This means knocking off the plaster and attaching an insulated laminate board that is then skimmed over to make it merge into the side wall.
A list of lessons learned
As our house is a fairly small terraced house full of stuff, living in it while the building was going on was quite tricky, so here’s a list of lessons learned:
And the cost? Well, the main cost is in the labour: the time spent installing the insulation cost £2,200 (incl VAT); plumber, radiator and materials cost £430, and plasterer and materials £926. Building materials were £615 plus Knauf materials, which amounted to £505. Total cost £4,814.74. That sounds like a lot, but bear in mind our walls were shot anyway and needed mending in two of the three rooms, and the third one with two outside walls was unbearably cold so it was a must to get it insulated. So the extra cost to us was probably about £3,000. But hey, this winter I’m hoping we’ll feel the insulation compensation – physically and financially.
Now we’re so well insulated we have to make sure the ventilation is good – which is what’s happening this month with the installation of some Heat Recovery Units. And the highlight of it all – we’re getting a wood-burning stove. I can’t wait.
Sue Wheat is a freelance journalist
Donate to The Ecologist and support high impact environmental journalism and analysis.
The latest edition of Resurgence & Ecologist is out now, and available to buy. Find out more.
Or, download a free sample copy of a past issue of Resurgence & Ecologist.
Download the latest essay from our Megamorphosis series now.
Donate to The Ecologist and support high impact environmental journalism and analysis.
Sign up for our WEEKLY newsletters – and never miss out on the amazing news and comment articles we publish.
The Ecologist is an environmental news and analysis website with a focus on environmental, social and economic justice.
Our aim is to educate and inform as many people as possible about the wonders of nature, the crisis we face and the best solutions and methods in managing that crisis. Find out about our mission, and our team, here. The website is owned and published by The Resurgence Trust, a company limited by guarantee registered in England and Wales (5821436) and a charity registered in England and Wales (1120414). To receive the magazine, become a member now. The views expressed in the articles published on this site may not necessarily reflect those of the trust, its trustees or its staff.